Tracker :  Tracker Principle : controls azimuth angle according to astronomical sun positioning  Tracking axis : single axis  Size : 170mm x 120mm  Input voltage : 12VDC  Enclosure   IP65 ABS grade  Termination : IP65 graded ABS glands – 2 nos  Output : 12V output to actuator up to 20A load  Resolution : 0.1 degrees  Axis angle : settable up to +/‐ 60 degrees  Control action : automatic closed loop using inbuilt inclinometer for angle feedback  Display : 16 x2 LCD display  Timing : Inbuilt using highly accurate RTC with independent battery backup  Accuracy : < +/‐1 degrees  Safety features : a. Reverse polarity protection     b. Over current protection     c. Voltage spike suppression     d. over current drain protection against mechanical failure of the actuator system *
	** The unit has an inbuilt time limit for the on time of the actuator fixed at approximately 2.5 minutes. This is to ensure that if the actuator fails to move the panel to the required target angle for more than 2.5 minutes, the unit turns off the actuator load to preserve battery life and indicates “mech failure” for 3 seconds on the LCD display before skipping to the next target angle.
	Charger :  Input : Photovoltaic (PV) Panel or equivalent DC voltage source  Output : To 12V,7.5AH Sealed Lead acid Battery  Charging protocol : 3-stage intelligent CV/CC charging profile  Boost Voltage : 14.4V DC Boost current limit   1.0A  Equalisation voltage : 14.4V  Equalization threshold current : 0.01C (0.07A)  Trickle voltage : 13.5V  Trickle current limit : 0.4A  Low battery threshold : 10.8V