Temperature Recorder in chennai

Accept input RTD, Thermocouple, Voltage , Current

          Process – Temperature , Pressure, Humidity ,Level

          Flow,Co2, Air velocity, Diff pressure etc …

          Optional for with and with out Display

          Also available single pen and 2/3/6/12 point ( Input)

          Operating Voltage 110 VAC or 230 VAC

          Chart speed 20 mm/ hour  and up to  200 mm/ hour optional

          Chart Size 120mm or 180 mm , pen and multi color ribbon

                                                              External power supply for transmitter optional

                                                              Cutout size : 208 X266 mm

          Optional : Sizes, 110VAC supply, Digital Display, single  pen and Multi Point recorder, chart speed, chart size with RTDs, Thermocouples, Enclosure , Transmitter Power supply , metal case , wall mounting and control panel     

          Application : All temperature/ Humidity/Pressure  Indicating and recording systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , Room environment etc

portable thermometer in chennai

TDPI Series Digital Temperature Indicator Micro-controller based, micro-power, precision general purpose thermometer designed for used with type J, K, T, R, S, & RTD – PT100 sensors, Accuracy : 0.1 % of FS
Display: 5 DGT 15 mm high LCD ,Resolution: 0.1^oC
Input: J, K, T, R, S, PT100,CJ Compensation: Automatic of 1^oC Accuracy
Effect of Lead Wire:
RTD - 1^oC for 10% of nominal resistance per lead of 3 wire RTD's 
T/C's - 1^oC for T/C lead wire resistance of 100 Ohm.

Power supply:6 VDC (1.5 V X 4 No Alkaline)

Recommended DURACELL type MN1500-LR6

LOW Battery: Provided
Enclosure Size: 80 X 140 x 22 mm approx
Supplied with leather case.

Optional : with Thermocouple as per Range , dual / single Input, with Digital power operated Indicator, Controller , Recorder , Leather bag , IR Thermometer and Calibration Certificate etc…

 Application : All Temperature Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room Temperature , use master calibration Indicator etc …        

Humidity transmitter in chennai

Transmitter Accept input RTDs,Voltage ,current

           Process – Temperature and  Humidity

           Temperature  Range  : 0 to 50 Deg C

           Temperature Out put  : 0 /4-20mA ( 2 Wire)

           Humidity  Range  : 0 to 100 % RH

           Humidity Out put  : 0 /4-20mA ( 2 Wire)

           Calibration Zero and Span adjustment

           Accuracy :±2%rh/±0.3k, Power supply : 12-36 VDC

           Output Load at 20 mA , 600 ohms maximum @ 24 VDC

                                                                                             With Display  optional , Range select at factory

                                                                                             Single/ Dual Input optional , wall  mounting

          Optional :  110VAC supply, Dual/Single output, Single Display, Jumbo Display, with RTDs , Thermocouples, Transmitters, Enclosure , universal Power supply , metal case , wall mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

          Application : All Process Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online

pressure , humidity etc …    

Flame Proof controller in chennai

Accept input RTD, Thermocouple, Voltage , Current

          Process – Temperature , Pressure, Humidity ,Level

          Flow,Co2, Air velocity, Diff pressure etc …

          Resolution Available 0.01/0.1/1

          Display Range -999 to 9999 counts

          Wall mounting  , Power supply : 230 VAC

          CMRI Group I,IIA&IIB  Certified Flame Proof Enclosure

          Retransmission out put  4 -20mA optional

          Control Relay output , Optional Dual Display(PV/SV)

          Optional :  110VAC supply, 20A Relay ,control/Alarm output, Dual Display, Jumbo Display, with Flame Proof RTDs , Thermocouples, Transmitters, universal Power supply , Wire Gland, Space mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

          Application : All Process Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online pressure , humidity etc …  

Temperature Indicator in chennai

Accept input RTD, Thermocouple, Voltage , Current

          Process – Temperature , Pressure, Humidity ,Level

          Flow,Co2, Air velocity, Diff pressure etc …

          Resolution Available 0.001/0.01/0.1/1

          Display Range -999 to 9999 counts

          Panel /Wall mounting  , Power supply : 230 VAC

          Large display sizes 1”,2”,4”,6”,8”

          Manual selection 2/4/6/8/10/ 12 Zones available

          Size  available  as per No of Zone  and Display size

          Optional :  110VAC supply, control/Alarm output, Single Display, Jumbo Display, with RTDs , Thermocouples, Transmitters, Enclosure , universal Power supply , metal case , wall mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

          Application : Process Indicating systems for institutes, Industries ,mapping   , Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online pressure , humidity 

PID controller

Input: Universal [All type of thermocouple and PT100‚ Cu50 (RTD)‚ linear voltage‚ linear current‚ MV‚ 2 wire transmitter input]

Program: 50 steps (TUTC-P50); 30 steps (TUTC-P30); event output

Output: Relay‚ SSR‚ Linear voltage‚ linear current‚ Output range limit Control algorithm: AI PID / AI MPT; heating / cooling dual output with 2 sets of PID; auto tuning; Set point: Set point range limit; dual set point switch; remote set point Alarm: High‚ low‚ high deviation and low deviation, Communication: RS 485‚ RS 232 (Modularized Installable)Re transmission O/P: Linear current or voltage (SV OR PV), Power supply: SMPS 100~240VAC/DC‚ 50 Hz OR 24 V DC ,Accuracy: 0.2%FS Display resolution: 0.001° C (Selectable)Size (W x H x D): 48 x 48 x 95 (TUPC4848)‚ 96 x 96 x 100 (TUPC9696) , Operating ambient: Temp.:  10°C~60°C‚ humidity: <90%RH

Optional :  48VAC/24VDC supply, control/Alarm output, Dual Display, Jumbo Display, with Flame Proof RTDs , Thermocouples, Transmitters, universal Power supply , Wire Gland, Space mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

 Application : All Process Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online pressure , humidity etc … 

Universal signal Isolator

·         Input (Single or dual): All type of thermocouple and PT100‚ cu50 (RTD)‚ linear voltage‚ MV‚ linear current

·         Re transmission O/P (Dual): Linear current (4 20 mA) or voltage (Freely defined)

·         Power supply: SMPS 100~240VAC‚ 50 Hz

·         Re transmission accuracy: 0.3%FS± 1 Digit

·         Display resolution: 0.001° C (Selectable)

·         Size (W x H): 22.5 x 100 (DIN rail)

·         Other features: Input offset

·         Operating ambient: Temp.: 10C~60°C‚ humidity: <90%RH

           ultra compact size, DIN Rail-mounted, Dual channel, Acts as signal isolator, Acts as signal repeater

Optional :  24 VDC supply, with  Display, Jumbo Display, with RTDs , Thermocouples, Transmitters, Enclosure  and  loop powered indicator etc… 

          Application : All Process Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator

, clean Room environment , online pressure , humidity etc …    

Input: Universal [All type of thermocouple and PT100‚ Cu50 (RTD)‚ linear voltage‚ linear current‚ MV‚ 2 wire transmitter input]

Program: 50 steps (TUTC-P50); 30 steps (TUTC-P30); event output

Output: Relay‚ SSR‚ Linear voltage‚ linear current‚ Output range limit Control algorithm: AI PID / AI MPT; heating / cooling dual output with 2 sets of PID; auto tuning; Set point: Set point range limit; dual set point switch; remote set point Alarm: High‚ low‚ high deviation and low deviation, Communication: RS 485‚ RS 232 (Modularized Installable)Re transmission O/P: Linear current or voltage (SV OR PV), Power supply: SMPS 100~240VAC/DC‚ 50 Hz OR 24 V DC ,Accuracy: 0.2%FS Display resolution: 0.001° C (Selectable)Size (W x H x D): 48 x 48 x 95 (TUPC4848)‚ 96 x 96 x 100 (TUPC9696) , Operating ambient: Temp.:  10°C~60°C‚ humidity: <90%RH

Optional :  48VAC/24VDC supply, control/Alarm output, Dual Display, Jumbo Display, with Flame Proof RTDs , Thermocouples, Transmitters, universal Power supply , Wire Gland, Space mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

 Application : All Process Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online pressure , humidity etc … 

Direct Input Accept  PH electrode, TDS/Conductivity  cell

          TDS Ranges 0-9999ppm or 0-99.99ppt

          PH Range 0.00 to 14.00 PH, Pressure -1 to1000 Bar/PSI

          Resolution  0.001/0.01/0.1/1 selectable

          Display Range -1999  to 9999  Selectable

          100-240 VAC mains operated with 24VDC Transmitter supply

          Offset, Hysteresis, Range selectable, Dual output

          Retransmission out put  4 -20mA optional

          Auto/Manual Temperature compensation 

          Size  available 96X96mm , wall 192X110mm

          Optional : output  20A relay, Input Type, customized  input with Fixed Range, Dual output , Transmitters, Relay/SSR, Electrodes , TDS/Conductivity cell, Enclosure , RT output , metal case , wall mounting and control panel etc…   

          Application : All Process Indicating and Controlling systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , Room environment etc …  

Flow Totalizer

low Input: Linear Voltage (0-5V DC OR 1-5V DC, Linear Current (4-20mA), Two Wire Transmitter Input (All Linear inputs can be configured with or without Square Root Extraction) OR Frequency Input
Temperature Input: RTD PT-100 OR Thermocouple (K,E,J) – For Temperature Compensation (Compensation possible with TUPC-FC)
Pressure Input: Linear Voltage (0-5V DC OR 1-5V DC, Linear Current (4-20mA) –For Pressure Compensation (Compensation possible with TUPC-FC)
Display: Flow Rate, Accumulated or Total Flow, Pressure & Temperature
Accuracy: 0.2%FS
Output for Batch Control: Relay
Set Point: Set point Range Limit; Dual Set Point Switch; Remote Set point
Alarm: High & Low Alarms for Flow, Temperature and Pressure
Communication: RS485 (Plug-in Module)
Re Transmission O/P: Linear Current or Voltage (SV OR PV)
Power Supply: SMPS100~240VAC/DC‚50Hz OR 24 V DC, Size : 96X96X100mm

Optional :  Flow sensors/Transmitters 48VAC/24VDC supply, control/Alarm output, Dual Display, Jumbo Display, with Flame Proof RTDs , Thermocouples, Transmitters, universal Power supply , Wire Gland, Space mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

 Application : All Process Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online pressure , humidity etc …