Tracker :  Tracker Principle : controls azimuth angle according to astronomical sun positioning  Tracking axis : single axis  Size : 170mm x 120mm  Input voltage : 12VDC  Enclosure   IP65 ABS grade  Termination : IP65 graded ABS glands – 2 nos  Output : 12V output to actuator up to 20A load  Resolution : 0.1 degrees  Axis angle : settable up to +/‐ 60 degrees  Control action : automatic closed loop using inbuilt inclinometer for angle feedback  Display : 16 x2 LCD display  Timing : Inbuilt using highly accurate RTC with independent battery backup  Accuracy : < +/‐1 degrees  Safety features : a. Reverse polarity protection     b. Over current protection     c. Voltage spike suppression     d. over current drain protection against mechanical failure of the actuator system *
	** The unit has an inbuilt time limit for the on time of the actuator fixed at approximately 2.5 minutes. This is to ensure that if the actuator fails to move the panel to the required target angle for more than 2.5 minutes, the unit turns off the actuator load to preserve battery life and indicates “mech failure” for 3 seconds on the LCD display before skipping to the next target angle.
	Charger :  Input : Photovoltaic (PV) Panel or equivalent DC voltage source  Output : To 12V,7.5AH Sealed Lead acid Battery  Charging protocol : 3-stage intelligent CV/CC charging profile  Boost Voltage : 14.4V DC Boost current limit   1.0A  Equalisation voltage : 14.4V  Equalization threshold current : 0.01C (0.07A)  Trickle voltage : 13.5V  Trickle current limit : 0.4A  Low battery threshold : 10.8V

Temperature Recorder in chennai

Accept input RTD, Thermocouple, Voltage , Current

          Process – Temperature , Pressure, Humidity ,Level

          Flow,Co2, Air velocity, Diff pressure etc …

          Optional for with and with out Display

          Also available single pen and 2/3/6/12 point ( Input)

          Operating Voltage 110 VAC or 230 VAC

          Chart speed 20 mm/ hour  and up to  200 mm/ hour optional

          Chart Size 120mm or 180 mm , pen and multi color ribbon

                                                              External power supply for transmitter optional

                                                              Cutout size : 208 X266 mm

          Optional : Sizes, 110VAC supply, Digital Display, single  pen and Multi Point recorder, chart speed, chart size with RTDs, Thermocouples, Enclosure , Transmitter Power supply , metal case , wall mounting and control panel     

          Application : All temperature/ Humidity/Pressure  Indicating and recording systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , Room environment etc

portable thermometer in chennai

TDPI Series Digital Temperature Indicator Micro-controller based, micro-power, precision general purpose thermometer designed for used with type J, K, T, R, S, & RTD – PT100 sensors, Accuracy : 0.1 % of FS
Display: 5 DGT 15 mm high LCD ,Resolution: 0.1^oC
Input: J, K, T, R, S, PT100,CJ Compensation: Automatic of 1^oC Accuracy
Effect of Lead Wire:
RTD - 1^oC for 10% of nominal resistance per lead of 3 wire RTD's 
T/C's - 1^oC for T/C lead wire resistance of 100 Ohm.

Power supply:6 VDC (1.5 V X 4 No Alkaline)

Recommended DURACELL type MN1500-LR6

LOW Battery: Provided
Enclosure Size: 80 X 140 x 22 mm approx
Supplied with leather case.

Optional : with Thermocouple as per Range , dual / single Input, with Digital power operated Indicator, Controller , Recorder , Leather bag , IR Thermometer and Calibration Certificate etc…

 Application : All Temperature Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room Temperature , use master calibration Indicator etc …        

Humidity transmitter in chennai

Transmitter Accept input RTDs,Voltage ,current

           Process – Temperature and  Humidity

           Temperature  Range  : 0 to 50 Deg C

           Temperature Out put  : 0 /4-20mA ( 2 Wire)

           Humidity  Range  : 0 to 100 % RH

           Humidity Out put  : 0 /4-20mA ( 2 Wire)

           Calibration Zero and Span adjustment

           Accuracy :±2%rh/±0.3k, Power supply : 12-36 VDC

           Output Load at 20 mA , 600 ohms maximum @ 24 VDC

                                                                                             With Display  optional , Range select at factory

                                                                                             Single/ Dual Input optional , wall  mounting

          Optional :  110VAC supply, Dual/Single output, Single Display, Jumbo Display, with RTDs , Thermocouples, Transmitters, Enclosure , universal Power supply , metal case , wall mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

          Application : All Process Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online

pressure , humidity etc …    

Flame Proof controller in chennai

Accept input RTD, Thermocouple, Voltage , Current

          Process – Temperature , Pressure, Humidity ,Level

          Flow,Co2, Air velocity, Diff pressure etc …

          Resolution Available 0.01/0.1/1

          Display Range -999 to 9999 counts

          Wall mounting  , Power supply : 230 VAC

          CMRI Group I,IIA&IIB  Certified Flame Proof Enclosure

          Retransmission out put  4 -20mA optional

          Control Relay output , Optional Dual Display(PV/SV)

          Optional :  110VAC supply, 20A Relay ,control/Alarm output, Dual Display, Jumbo Display, with Flame Proof RTDs , Thermocouples, Transmitters, universal Power supply , Wire Gland, Space mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

          Application : All Process Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online pressure , humidity etc …  

Temperature Indicator in chennai

Accept input RTD, Thermocouple, Voltage , Current

          Process – Temperature , Pressure, Humidity ,Level

          Flow,Co2, Air velocity, Diff pressure etc …

          Resolution Available 0.001/0.01/0.1/1

          Display Range -999 to 9999 counts

          Panel /Wall mounting  , Power supply : 230 VAC

          Large display sizes 1”,2”,4”,6”,8”

          Manual selection 2/4/6/8/10/ 12 Zones available

          Size  available  as per No of Zone  and Display size

          Optional :  110VAC supply, control/Alarm output, Single Display, Jumbo Display, with RTDs , Thermocouples, Transmitters, Enclosure , universal Power supply , metal case , wall mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

          Application : Process Indicating systems for institutes, Industries ,mapping   , Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online pressure , humidity 

PID controller

Input: Universal [All type of thermocouple and PT100‚ Cu50 (RTD)‚ linear voltage‚ linear current‚ MV‚ 2 wire transmitter input]

Program: 50 steps (TUTC-P50); 30 steps (TUTC-P30); event output

Output: Relay‚ SSR‚ Linear voltage‚ linear current‚ Output range limit Control algorithm: AI PID / AI MPT; heating / cooling dual output with 2 sets of PID; auto tuning; Set point: Set point range limit; dual set point switch; remote set point Alarm: High‚ low‚ high deviation and low deviation, Communication: RS 485‚ RS 232 (Modularized Installable)Re transmission O/P: Linear current or voltage (SV OR PV), Power supply: SMPS 100~240VAC/DC‚ 50 Hz OR 24 V DC ,Accuracy: 0.2%FS Display resolution: 0.001° C (Selectable)Size (W x H x D): 48 x 48 x 95 (TUPC4848)‚ 96 x 96 x 100 (TUPC9696) , Operating ambient: Temp.:  10°C~60°C‚ humidity: <90%RH

Optional :  48VAC/24VDC supply, control/Alarm output, Dual Display, Jumbo Display, with Flame Proof RTDs , Thermocouples, Transmitters, universal Power supply , Wire Gland, Space mounting, Retransmission output 4-20mA  and  loop powered indicator etc… 

 Application : All Process Indicating systems, Heat treatment Furnace , Oven, Cooling Chamber , molding , packing machine , AC , refrigerator , clean Room environment , online pressure , humidity etc …